Command Reference Guide

52 ● controller cpos 3Com Router 5000 Family and Router 6000 Family
Command Reference
controller cpos
Purpose Use the controller cpos command to enter CPOS interface view.
Syntax controller cpos cpos-number
Parameters cpos-number
CPOS interface number.
Example Enter the interface view of CPOS 1/0/0.
<3Com > system-view
[3Com ] controller cpos 1/0/0
[3Com -Cpos1/0/0]
View This command can be used in the following views:
■ System view
Description Before you can configure a CPOS physical interface, you must enter its CPOS interface
view. This is similar to interfaces that support channelization such as CE1, CE3, and
CT1.