Command Reference Guide

50 ● code (CEI/PRI Interface) 3Com Router 5000 Family and Router 6000 Family
Command Reference
code (CEI/PRI Interface)
Purpose Use the code command to set the line code format for a CE1/PRI interface.
Use the undo code command to restore the default line code format of the
interface.
Syntax code { ami | hdb3 }
undo code
Parameters ami
Adopts alternate mark inversion (AMI) line code
format.
hdb3
Adopts high density bipolar 3 (HDB3) line code format.
This parameter is only significant for a CE1/PRI
interface.
Default The line code format of CE1/PRI interface defaults to hdb3.
Example Set the line code format of the interface E1 3/0/0 to ami.
[3Com -E1 3/0/0]code ami
View This command can be used in the following views:
■ CE1/PRI Interface view
Description You should keep the line code format of the interface in consistency with that used by
the remote device.