Command Reference Guide

10 ● acl 3Com Router 5000 Family and Router 6000 Family
Command Reference
acl
Purpose Use the acl command to reference an ACL to control call-in and call-out of VTY
(Telnet and SSH) users.
Use the undo acl command to remove the ACL.
Syntax acl acl-number { inbound | outbound }
undo acl { inbound | outbound }
Parameters acl-number
Address access control list number. Valid values are
2000 to 3999.
inbound
Controls call-in.
outbound
Controls call-out.
Default By default, call-in and call-out of VTY users are not restricted.
Example Remove the restriction on outgoing Telnet calls.
[3Com-ui-vty0] undo acl outbound
View This command can be used in the following views:
■ User Interface view