Command Reference Guide

3Com Router 5000 Family and Router 6000 Family code (CT1/PRI Interface) ● 47
Command Reference
code (CT1/PRI Interface)
Purpose Use the code command to set the line code format on the CT1/PRI interface.
Use the undo code command to restore the default or b8zs.
Syntax code { ami | b8zs }
undo code
Parameters ami
AMI line code format.
b8zs
Bipolar with 8-zero substitution (b8zs) line code
format.
Example Set the line code format of the interface T1 1/0/0 to ami.
[3Com -T1 1/0/0] code ami
View This command can be used in the following views:
■ CT1/PRI Interface view
Description You should keep the line code format of the interface in consistency with the one
used by the remote device.