Command Reference Guide

46 ● clock (CT1/PRI Interface) 3Com Router 5000 Family and Router 6000 Family
Command Reference
clock (CT1/PRI Interface)
Purpose Use the clock command to set clocking on the CT1/PRI interface.
Use the undo clock command to restore the default or slave, the line clock.
Syntax clock { master | slave }
undo clock
Parameters master
Adopts the internal clock.
slave
Adopts the line clock.
Example Set the clock of the CT1/PRI interface to internal (master).
[3Com -T1 1/0/0] clock master
View This command can be used in the following views:
■ CT1/PRI Interface view
Description When the CT1/PRI interface is working as DCE, use internal clock for it, that is,
master. When it is working as DTE, chose the line clock, that is, slave for it.