Command Reference Guide

3Com Router 5000 Family and Router 6000 Family clock ● 41
Command Reference
clock
Purpose Use the clock command to set the clock mode of the POS interface.
Use the undo clock command to restore the default, slave.
Syntax clock { master | slave }
undo clock
Parameters master
Sets the clock mode of the POS interface to master.
slave
Sets the clock mode of the POS interface to slave.
Example Set the clock mode of the interface POS 1/0/0 to master.
<3Com > system-view
[3Com ] interface pos 1/0/0
[3Com -Pos1/0/0] clock master
View This command can be used in the following views:
■ POS Interface view