Command Reference Guide

38 ● clock 3Com Router 5000 Family and Router 6000 Family
Command Reference
clock
Purpose Use the clock command to set the clock mode of the CPOS interface.
Use the undo clock command to restore the default or slave clock.
Syntax clock { master | slave }
undo clock
Parameters master
Sets the clock mode of the CPOS interface to master.
slave
Sets the clock mode of the CPOS interface to slave.
Example Set the clock mode of CPOS 1/0/0 to master.
<3Com > system-view
[3Com ] controller cpos 1/0/0
[3Com -Cpos1/0/0] clock master
View This command can be used in the following views:
■ CPOS Interface view