Command Reference Guide

3Com Router 5000 Family and Router 6000 Family channel-set (CE1/PRI Interface) ● 31
Command Reference
channel-set (CE1/PRI Interface)
Purpose Use the channel-set command to bundle some timeslots of a CE1/PRI interface
into a channel-set.
Use the undo channel-set command to remove the specified timeslot bundle.
Syntax channel-set set-number timeslot-list range
undo channel-set set-number
Parameters set-number
The number of the channel set formed by bundling the
timeslots on the interface. Valid values are 0 to 30.
range
The number of the timeslots that are bundled. Valid
values are 1 to 31. When specifying the timeslots to be
bundled, you may specify any of the following:
■ a single timeslot by specifying a number
■ a range of timeslots by specifying a range between
number1-number2
■ several discrete timeslots by specifying number1,
number2-number3
Default By default, no timeslots are bundled into channel-sets.
Example Bundle the timeslots 1, 2, 5, 10 through 15, and 18 on the CE1/PRI interface into
channel-set 0.
[3Com -E1 3/0/0] channel-set 0 timeslot-list 1,2,5,10-15,18
Make the same configuration on the CE1/PRI interface on the remote router.
[3Com -E1 3/0/0] channel-set 0 timeslot-list 1,2,5,10-15,18
View This command can be used in the following views:
■ CE1/PRI Interface view
Description A CE1/PRI interface in CE1/PRI mode is physically divided into 32 timeslots numbered
from 0 through 31.
In actual applications, all the timeslots except for timeslot 0 can be bundled into
multiple channel-sets and the system will automatically create a serial interface for
each set. This serial interface has the same logic features of synchronous serial
interface.