Command Reference Guide

30 ● cable (CT3 Interface) 3Com Router 5000 Family and Router 6000 Family
Command Reference
cable (CT3 Interface)
Purpose Use the cable command to configure the length of the cable with which a CT3
interface is connected.
Use the undo cable command to restore the default length of the cable with which
the CT3 interface is connected.
Syntax cable feet
undo cable
Parameters feet
Cable length. Valid values are 0 to 450 feet.
Example Set the cable length to 50 feet on the interface T3 1/0/0.
[3Com -T3 1/0/0] cable 50
View This command can be used in the following views:
■ CT3 Interface view
Description The parameter feet defaults to 49.
The length of the cable for CT3 interface connection refers to the distance between
the router and the cable distribution rack.