Command Reference Guide

3Com Router 5000 Family and Router 6000 Family cable ● 27
Command Reference
cable
Purpose Use the cable command to configure the cable mode of ATM T3 cable, i.e., to set
the distance between the router and the cable distribution frame.
Use the undo cable command to restore the default.
Syntax cable { long | short }
undo cable
Parameters long
Long distance mode. Long cable length ranges from
151 to 500 meters.
short
Short distance mode. Short cable length ranges from 0
to 150 meters.
Default By default, short distance mode is used.
Example Set the cable length mode of ATM T3 1/0/0 to long.
<3Com > system-view
[3Com ] interface atm 1/0/0
[3Com -Atm1/0/0] cable long
View This command can be used in the following views:
■ ATM T3 Interface view