Command Reference Guide

3Com Router 5000 Family and Router 6000 Family cable ● 25
Command Reference
cable
Purpose Use the cable command to set the cable length matching the CE1/PRI interface.
Use the undo cable command to restore the default.
Syntax cable { long | short }
undo cable
Parameters long
The attenuation of the receiver is -43 dB
short
The attenuation of the receiver is -10 dB.
Default By default, the long parameter applies.
Example Set the cable length matching the CE1/PRI interface to short.
[Router-E1 3/0/0] cable short
View This command can be used in the following views:
■ CE1/PRI Interface view