Command Reference Guide

12 ● ahdsl annex 3Com Router 5000 Family and Router 6000 Family
Command Reference
ahdsl annex
Purpose Use the shdsl annex command to configure annex standard at an SHDSL
interface. You cannot activate a link with different standard types at its two ends.
Use the undo shdsl annex command to restore the default standard.
Syntax shdsl annex { a | b }
undo shdsl annex
Parameters a
Annex a.
b
Annex b, which is the default.
Example Restore the default standard type on the SHDSL interface.
[3Com -Atm1/0/0] undo shdsl annex
View This command can be used in the following views:
■ ATM (G.SHDSL) Interface view
Description When setting annex standard, you must consider the standard adopted in the region
where your network is located. When ATU-C and ATU-R uses different standards,
G.SHDSL cannot set up connection.