Command Reference Guide

3Com Router 5000 Family and Router 6000 Family adsl tx_attenuation ● 11
Command Reference
adsl tx_attenuation
Purpose Use the adsl tx_attenuation command to set attenuation value for ADSL
transmit power.
Use the undo adsl tx_attenuation command to restore the default value.
Syntax adsl tx_attenuation attenuation
undo adsl tx_attenuation
Parameters attenuation
Attenuation value. Valid values are 0 to 12.
If no value is specified, the default is 0.
Example [3Com -Atm1/0/0] adsl tx_attenuation 10
View This command can be used in the following views:
■ ATM (ADSL) Interface view