Command Reference Guide

438 ● xmodem get 3Com Router 5000 Family and Router 6000 Family
Command Reference
xmodem get
Purpose Use the xmodem get command to download a file by using Xmodem through the
AUX port. VRP supports 128-byte packets and CRC check.
Syntax xmodem get filename
Parameters filename
Name of the file to be saved to Flash. It must be an
absolute file path.
Example Download a file with Xmodem through the AUX port and assign the name test.txt to
the file to be saved to Flash.
<3Com> xmodem get flash:/test.txt
After the command is executed, you can send the file through the
hyperterminal.
View This command can be used in the following views:
■ User view
Description CAUTION:
The xmodem get command is not supported on asynchronous serial interfaces but
the AUX port. In addition, simultaneous operations are not allowed.