Command Reference Guide

3Com Router 5000 Family and Router 6000 Family timer wait ● 417
Command Reference
timer wait
Purpose Use the timer wait command to set a timeout period for a probing attempt.
Use the undo timer wait command to restore the default timeout period for a
probing attempt.
Syntax timer wait seconds
undo timer wait
Parameters seconds
Timeout time for a probing attempt (in seconds). Valid
values are 1 to 30.
If no value is specified, the default is 2 seconds.
Example Set the probing attempt timeout period to three seconds for detect group 3.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] detect-group 10
[3Com-detect-group-10] timer wait 3
View This command can be used in the following views:
■ Detect Group view