Command Reference Guide

416 ● timer loop 3Com Router 5000 Family and Router 6000 Family
Command Reference
timer loop
Purpose Use the timer loop command to set the auto detect interval, that is, the frequency
for auto detect.
Use the undo timer loop command to restore the default auto detect interval.
Syntax timer loop seconds
undo timer loop
Parameters seconds
Auto detect interval (in seconds). Valid values are 1 to
86,400.
If no value is specified, the default is 15 seconds.
Example Set the detect interval of detect group 10 to 60 seconds.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] detect-group 10
[3Com-detect-group-10] timer loop 60
View This command can be used in the following views:
■ Detect Group view