Command Reference Guide

3Com Router 5000 Family and Router 6000 Family timeout ● 415
Command Reference
timeout
Purpose Use the timeout command to configure a timeout time for a test.
Use the undo timeout command to restore the default.
Syntax timeout time
undo timeout
Parameters time
Timeout time (in seconds). Valid values are 1 to 60.
It no value is specified, the default is three seconds. For
a Jitter test, the default is five seconds.
Example Set the timeout time to 10 seconds.
[Router-administrator-icmp] timeout 10
View This command can be used in the following views:
■ HWPing Test Group view