Command Reference Guide

3Com Router 5000 Family and Router 6000 Family tftp-server timeout ● 411
Command Reference
tftp-server timeout
Purpose Use the tftp-server timeout command to configure UDP packet response
timeout time for TFTP server.
Use the undo tftp-server timeout command to restore the default.
Syntax tftp-server timeout seconds
undo tftp-server timeout
Parameters seconds
Response timeout time for a UDP packet (in seconds).
Valid values are 1 to 20.
If no value is specified, the default is five seconds.
Example Configure UDP packet response timeout time for TFTP server to 10 seconds.
[3Com]tftp-server timeout 10
View This command can be used in the following views:
■ System view