Command Reference Guide

410 ● tftp-server max-users 3Com Router 5000 Family and Router 6000 Family
Command Reference
tftp-server max-users
Purpose Use the tftp-server max-users command to maximum number of concurrent
users that are allowed to access TFTP server.
Use the undo tftp-server max-users command to restore to the default.
Syntax tftp-server max-users number
undo tftp-server max-users
Parameters number
Maximum number of users that are allowed to access
TFTP server. Valid values are 1 to 6 and defaults to 1.
Default By default, concurrent access of multiple users to TFTP server is not supported. If this
function is needed, users can configure it by themselves.
Example Configure the maximum number of concurrent users to access TFTP server to 3.
[Router] tftp-server max-users 3
View This command can be used in the following views:
■ System view