Command Reference Guide

408 ● tftp-server enable 3Com Router 5000 Family and Router 6000 Family
Command Reference
tftp-server enable
Purpose Use the tftp-server enable command to enable TFTP Server.
Use the undo tftp-server enable command to disable TFTP Server.
Syntax tftp-server enable
undo tftp-server enable
Parameters None
Default By default, TFTP server is disabled.
Example Enable TFTP server.
[Router] tftp-server enable
% Start TFTP Server
Disable TFTP server.
[Router] undo tftp-server enable
Some files are being transferred now. This operation will cut the
connection between the server and client, continue?[Y/N]:y
View This command can be used in the following views:
■ System view
Description When you use the undo tftp-server enable command to disable TFTP server, if
a file is being transmitted, the system prompts you whether to forcibly disconnect the
server. Only after your confirmation is the TFTP server disconnected.