Command Reference Guide

3Com Router 5000 Family and Router 6000 Family tftp host source-interface ● 403
Command Reference
tftp host source-interface
Purpose Use the tftp host source-interface command to specify the source interface
that the TFTP client uses when accessing the specified TFTP server.
Syntax tftp host source-interface interface-type interface-number
Parameters host
IP address or name of a TFTP server.
interface-type
interface-number
Specifies a source interface by its type and number.
Default By default, the TFTP client uses the IP address of the outbound interface to access the
specified TFTP server.
Example Set the source IP address that the TFTP client uses when accessing the TFTP server at
192.168.0.2 to ethernet0/0/0.
<Router> tftp 192.168.0.2 source-interface ethernet0/0/0
View This command can be used in the following views:
■ User view
Description Use the tftp host source-interface command to specify the source interface
that the TFTP client uses when accessing the specified TFTP server. This interface must
be an exiting local interface.