Command Reference Guide

400 ● test-type 3Com Router 5000 Family and Router 6000 Family
Command Reference
test-type
Purpose Use the test-type command to configure the type of the test.
Syntax test-type type [codec codec-value]
Parameters test-type
Test type, which can be one of the following keywords:
■ dhcp: DHCP test.
■ dlsw: DLSw test.
■ ftp: FTP connection test.
■ http: HTTP connection test.
■ icmp: ICMP test, which is the default test type.
■ jitter: Jitter test for analyzing delay variations in UDP
packet transmission.
■ snmpquery: SNMP test.
■ tcpprivate: Tests the TCP connection of a specified
unknown port.
■ tcppublic: Tests the TCP connection of port 7.
■ udpprivate: Tests the UDP connection of a specified
unknown port.
■ udppublic: Tests the UDP connection of port 7.
codec-value: Coding type for a voice test, which can
be configured for a Jitter test and can be the following
keywords:
■ g711a: Specifies coding type to G.711 A-Law.
■ g711u: Specifies coding type to G.711
muHmm-Law.
■ g729a: Specifies coding type to G.729A-Law.
Example Set test type to ICMP.
[Router-administrator-icmp] test-type icmp
View This command can be used in the following views:
■ HWPing Test Group view
Description HWPing tests include DHCP, DLSw, FTP, HTTP, ICMP, Jitter, SNMP, TCP, and UDP tests.