Command Reference Guide

398 ● test-failtimes 3Com Router 5000 Family and Router 6000 Family
Command Reference
test-failtimes
Purpose Use the test-failtimes command to configure the number of consecutive test
failures allowed before a trap is sent to the NMS.
Use the undo test-failtimes command to restore the default.
Syntax test-failtimes times
undo test-failtimes
Parameters times
Number of consecutive test failures allowed. Valid
values are 1 to 15.
If no value is specified, the default is 1.
Example Send a trap to the NMS after three consecutive test failures.
[Router] test-failtimes 3
View This command can be used in the following views:
■ HWPing Test Group view
Description A test may include multiple probes.