Command Reference Guide

3Com Router 5000 Family and Router 6000 Family terminal monitor ● 395
Command Reference
terminal monitor
Purpose Use the terminal monitor command to have the terminal display debugging
/log/trap information sent from the info-center.
Use the undo terminal monitor command to disable the terminal to display
debugging/log/trap information.
Syntax terminal monitor
undo terminal monitor
Parameters None
Default By default, terminal display is turned on for console users, allowing all prompt
messages to output to the console terminal.
Example Disable the terminal to display information sent from the info-center.
<3Com> undo terminal monitor
View This command can be used in the following views:
■ User view
Description For other types of terminal user, AUX, VTY, and TTY, terminal display is turned off by
default. To have the prompt messages for them output to the console terminal, you
need to configure the terminal monitor command.
The undo terminal monitor command prohibits all debugging, log, and trap
information from outputting to the current terminal, just as the undo terminal
debugging, undo terminal logging, and undo terminal trapping
commands would do.
When the terminal monitor command is configured, you can use the
terminal debugging/undo terminal debugging, terminal
logging/undo terminal logging, and terminal trapping/undo
terminal trapping commands to enable/disable debugging/log/trap information
output.