Command Reference Guide

3Com Router 5000 Family and Router 6000 Family telnet source-interface ● 391
Command Reference
telnet source-interface
Purpose Use the telnet source-interface command to telnet from the main IP address
of the specified interface to the destination IP address.
Syntax telnet ip-address [ port ] source-interface interface-type
interface-number
Parameters ip-address
Destination IP address.
port
Destination port number.
If no value is specified, the default is 23.
interface-type
interface-number
Specifies the source interface for telnet.
Example Telnet from the source interface ethernet 1/0/1 to the destination address 2.2.2.2.
<3Com> telnet 2.2.2.2 source-interface ethernet 1/0/1
View This command can be used in the following views:
■ User view
■ System view