Command Reference Guide

388 ● telnet 3Com Router 5000 Family and Router 6000 Family
Command Reference
telnet
Purpose Use the telnet command to telnet from this router to another device.
Syntax telnet [ vpn-instance vpn-instance-name ] host-ip-address [
service-port ]
Parameters vpn-instance
vpn-instance-name
Sets the VPN instance name of MPLS VPN.
host-ip-address
Host name or IP address of the remote device, in
dotted decimal format.
service-port
Number of the TCP port where the remote device
provides the Telnet service. Valid values are 0 to 65535.
Default By default, if the service-port is not specified, the Telnet port number is 23.
Example Telnet from router 3Com to router 3Com 2 at 129.102.0.1.
<3Com> telnet 129.102.0.1
Trying 129.102.0.1...
Service port is 23
Connected to 129.102.0.1
<3Com2>
View This command can be used in the following views:
■ User view
Description By executing the telnet command, you can telnet from this router to another
device to manage it.
Related Command display tcp status