Command Reference Guide

3Com Router 5000 Family and Router 6000 Family stopbits ● 387
Command Reference
stopbits
Purpose Use the stopbits command to set the stop bits on the user interface.
Use the undo stopbits command to restore the default.
Syntax stopbits { 1.5 | 1 | 2 }
undo stopbits
Parameters 1.5
1.5 stop bits.
1
1 stop bit (the default).
2
2 stop bits.
Example Use 1.5 stop bits on the user interface.
[3Com-ui-vty0] stopbits 1.5
View This command can be used in the following views:
■ User Interface view
Description Only when the serial interface works in asynchronous flow mode can the
configuration be effective.