Command Reference Guide

3Com Router 5000 Family and Router 6000 Family statistics {interval interval | max-group number } ● 385
Command Reference
statistics {interval interval | max-group
number }
Purpose Use the statistics { interval interval | max-group number } command to
configure the statistics interval and the maximum number of the groups of the
retained statistics information according to the configuration.
Use the undo statistics interval and undo statistics max-group
commands to remove your configuration and restore the default.
Syntax statistics{ interval interval | max-group number }
undo statistics { interval | max-group }
Parameters interval
Statistics interval (in minutes). Valid values are 1 to
1440.
If no value is specified, the default is 60 seconds.
number
Number of groups of statistics information. Valid
values are 1 to 100.
If no value is specified, the default is 2 groups.
Example Set the statistics interval to 120 minutes and the maximum number of statistics
groups to three.
<3Com> system-view
[3Com] hwping 1 1
[3Com-hwping-1-1] statistic interval 120
[3Com-hwping-1-1] statistic max-group 3
View This command can be used in the following views:
■ HWPing Test Group view
Description By default, the statistics interval for a test is once every 60 minutes and up to two
groups of statistics information can be retained.
Delete all statistics information when internet parameter changes.