Command Reference Guide

3Com Router 5000 Family and Router 6000 Family startup saved-configuration ● 383
Command Reference
startup saved-configuration
Purpose Use the startup saved-configuration command to specify the configuration
file used at next startup.
Use the undo startup saved-configuration command to configure the
system to boot without any configuration file at next startup.
Syntax startup saved-configuration filename
undo startup saved-configuration
Parameters filename
Configuration file name.
Example Set the configuration file used at next boot to master.cfg.
<3Com> startup saved-configuration master.cfg
Display the configuration files that the system saves for boot.
<3Com> display startup
Startup saved-configuration file: flash:/vrpcfg.cfg
Next startup saved-configuration file: flash:/master.cfg
vrpcfg.cfg is the default configuration file and master.cfg is the
configuration file used at next reboot.
Configure the system to boot without any configuration file at next startup.\
<3Com> undo startup saved-configuration
View This command can be used in the following views:
■ User view
Description When multiple configuration files are available on the Flash, you may use this
command to specify the one to be loaded at startup.
Table 4-2 shows how to name a configuration file:
Table 1 Name a configuration file
File name Description
vrpcfg.cfg Default name for the configuration file to be saved. The name is
specified by the manufacturer but you can modify the contents.
vrpcfg.def Default ex-factory configuration file name; its contents are
manufacturer specified.
vrpcfg.txt Name of the configuration file for some old 3Com devices.