Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
401402403404405406407408409410
362 ● source-port 3Com Router 5000 Family and Router 6000 Family
Command Reference
source-port
Purpose Use the source-port command to configure a source port number for this test.
Use the undo source-port command to cancel the configuration.
Syntax source-port port-number
undo source-port
Parameters port-number
Source port number used in the test.
If no value is specified, the default is 0.
Example Set the source port number to 8000 for this test.
[Router-administrator-icmp] source-port 8000
View This command can be used in the following views:
■ HWPing Test Group view