Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
401402403404405406407408409410
3Com Router 5000 Family and Router 6000 Family source-ip ● 361
Command Reference
source-ip
Purpose Use the source-ip command to configure a source IP address for this test.
Use the undo source-ip command to cancel the configuration.
Syntax source-ip ip-address
undo source-ip
Parameters ip-address
Source IP address used in the test.
Example Set the source IP address for this test to 169.254.10.2.
[Router-administrator-icmp] source-ip 169.254.10.2
View This command can be used in the following views:
■ HWPing Test Group view
Description The source IP address in this test defaults to the IP address of the interface where test
packets are to be sent.