Command Reference Guide

360 ● source-interface 3Com Router 5000 Family and Router 6000 Family
Command Reference
source-interface
Purpose Use the source-interface command to configure the source interface in the
transmitted test packets.
Use the undo source-interface command to cancel the configuration.
Syntax source-interface interface-type interface-number
undo source-interface
Parameters interface-type
Interface type.
interface-number
Interface number.
Default By default, no source interface is configured for the transmitted test packets.
Example Specify Ethernet 1 as the source interface in the transmitted test packet.
[Router-administrator-dhcp] source-interface ethernet 1
View This command can be used in the following views:
■ HWPing Test Group view