Command Reference Guide

356 ● snmp-agent trap queue-size 3Com Router 5000 Family and Router 6000 Family
Command Reference
snmp-agent trap queue-size
Purpose Use the snmp-agent trap queue-size command to set the length of the trap
queue to the specified host.
Use the undo snmp-agent trap queue-size command to cancel the setting.
Syntax snmp-agent trap queue-size size
undo snmp-agent trap queue-size
Parameters size
Length of the message queue. Valid values are 1 to
1000.
If no value is specified, the default lenth is 100.
Example Set the length of the outgoing trap queue to 200.
[3Com] snmp-agent trap queue-size 200
View This command can be used in the following views:
■ System view
Related Commands ■ snmp-agent trap enable
■ snmp-agent target-host
■ snmp-agent trap life