Command Reference Guide

350 ● snmp-agent sys-info 3Com Router 5000 Family and Router 6000 Family
Command Reference
snmp-agent sys-info
Purpose Use the snmp-agent sys-info command to set system information, including
system contact, physical location of the node, and SNMP version.
Use the undo snmp-agent sys-info command to cancel the current setting.
Syntax snmp-agent sys-info { contact sysContact | location sysLocation |
version { { v1 | v2c | v3 } * | all } }
undo snmp-agent sys-info { contact | location | version { { v1 | v2c |
v3 } * | all } }
Parameters contact
Sets the system contact.
sysContact
System contact string.
location
Sets the physical location of the node.
sysLocation
Physical location of the node.
version
Sets the SNMP version.
v1
SNMPv1.
v2c
SNMPv2c.
v3
SNMPv3.
*
Indicates to select from the three options of v1, v2c
and v3, at least one and at most all.
all
SNMPv1, SNMPv2c and SNMPv3.
Default By default, the system contact is R&D Beijing, Huawei Technologies Co.,Ltd., system
location is Beijing China and the version is SNMPv3.
Example Set the system contact to call Operator at 010-82882488.
[3Com] snmp-agent sys-info contact call Operator at 010-82882488
View This command can be used in the following views:
■ System view
Related Command display snmp-agent sys-info