Command Reference Guide

346 ● snmp-agent group 3Com Router 5000 Family and Router 6000 Family
Command Reference
Example Create the SNMPv3 group named Johngroup.
[3Com] snmp-agent group v3 Johngroup
View This command can be used in the following views:
■ System view
Description If no view is specified, the snmp-agent group v3 command considers
ViewDefault view as read-only by default. The rights of other views needs
configuration.
The snmp-agent group { v1 | v2c } command configures the SNMP community
attribute. Its default is the same as the snmp-agent group v3 command.
Related Commands ■ snmp-agent mib-view
■ snmp-agent usm-user