Command Reference Guide

3Com Router 5000 Family and Router 6000 Family snmp-agent ● 343
Command Reference
snmp-agent
Purpose Use the snmp-agent command to enable SNMP agent.
Use the undo snmp-agent command to disable SNMP agent.
Syntax snmp-agent
undo snmp-agent
Parameters None
Default By default, SNMP agent is disabled.
Example Disable the operating SNMP agent.
[3Com] undo snmp-agent
View This command can be used in the following views:
■ System view
Description Note that you can enable SNMP agent with any snmp-agent command but not
their undo form. When SNMP agent is disabled, configuring the undo form of any
SNMP agent command is useless.