Command Reference Guide

3Com Router 5000 Family and Router 6000 Family sftp source-ip ● 341
Command Reference
sftp source-ip
Purpose Use the sftp source-ip command to specify a source IP address for the packets
sent by the SFTP client. This IP address must be a local IP address.
Use the undo sftp source-ip command to delete the source IP address specified
for the SFTP client. After that, the source IP address of each packet sent by the SFTP
client is the IP address of the interface where the packet is sent out.
Syntax sftp source-ip ip-address
undo sftp source-ip
Parameters ip-address
Source IP address.
Default By default, the source IP address in each packet sent by the SFTP client is the IP
address of the interface where the packet is sent out.
Example Use 192.168.0.1 as the source IP address in the packets sent by the SFTP client.
[Router] sftp source-ip 192.168.0.1
View This command can be used in the following views:
■ System view
Description You may specify a source IP address for the packets sent by the Telnet server with the
sftp source-interface command or with the sftp source-ip command. If
both commands are configured, the one configured later overrides.