Command Reference Guide

3Com Router 5000 Family and Router 6000 Family rmon prialarm ● 317
Command Reference
rmon prialarm
Purpose Use the rmon prialarm command to add an entry to the prialarm table.
Use the undo rmon prialarm command to remove an entry from the prialarm
table.
Syntax rmon prialarm prialarm-entry prialarm-formula prialarm-des
sampling-timer { delta | absolute | changeratio } rising_threshold
threshold-value1 event-entry1 falling_threshold threshold-value2
event-entry2 entrytype { forever | cycle cycle-period } [ owner text ]
undo rmon prialarm entry-number
Parameters prialarm-entry
Prialarm index. Valid values are 1 to 65,535.
prialarm-formula
Prialarm formula, which returns a long integer. Create
your prialarm formula with caution to prevent errors
caused by overflow in each calculating step of your
prialarm formula.
alarm-des
Alarm description, consisting of a string from 0 to 127
characters long.
sampling-timer
Sampling interval (in seconds). Valid values are 10 to
65,535.
delta | absolute |
changeratio
Sets sample type to delta value, change ratio, or
absolute value.
threshold-value1
Rising threshold, a number greater than zero.
event-entry1
Index of the event associated with the rising threshold.
Valid values are 0 to 65,535.
threshold-value2
Falling threshold, a number greater than zero.
event-entry2
Index of the event associated with the falling
threshold. Valid values are 0 to 65535.
forever | cycle
cycle-period
Lifetime of the prialarm entry, which can be forever or
span the specified period.
owner text
Owner of the entry, consisting of a string from 1 to
128 characters long.
Example Remove prialarm entry 10.
[3Com] undo rmon prialarm 10
View This command can be used in the following views:
■ System view