Command Reference Guide

3Com Router 5000 Family and Router 6000 Family rmon event ● 315
Command Reference
rmon event
Purpose Use the rmon event command to add an event entry.
Use the undo rmon event command to remove an event entry.
Syntax rmon event event-entry [ description string ] { log | trap
trap-community | log-trap log-trapcommunity | none } [ owner text ]
undo rmon event event-entry
Parameters event-entry
Event index. Valid values are 1 to 65,535.
description string
Event description, consisting of a string from 1 to 127
characters long.
log
Sets event type to log.
trap
Sets event type to trap.
trap-community
Name of the community to which trap messages are
sent.
log-trap
Sets event type to log-and-trap.
log-trapcommunity
Name of the community to which trap messages are
sent.
none
Event other than log, trap, and log-and-trap.
owner text
Owner of the entry, consisting of a string from 1 to
127 characters long.
Example Add event entry 10 to the event table and set its type to log.
[3Com] rmon event 10 log
View This command can be used in the following views:
■ System view
Description The type of notification made about an event can be: log, sending a trap to the
network management station, or both. Based on the received information, the
network management system can handle the event appropriately.