Command Reference Guide

3Com Router 5000 Family and Router 6000 Family reset saved-configuration ● 307
Command Reference
reset saved-configuration
Purpose Use the reset saved-configuration command to delete the configuration file
loaded at this startup from the Flash.
Syntax reset saved-configuration
Parameters None
Example Delete the configuration file loaded at this startup from the Flash.
<3Com> reset saved-configuration
The saved configuration will be erased.
Are you sure?[Y/N]y
Configuration in the device is being cleared.
Please wait ...
....
Configuration in the device is cleared.
View This command can be used in the following views:
■ User view
Description This command could not have the router boot with empty configuration at next
startup.
Use this command with caution and under the guidance of technical staff.
You may use this command to delete the configuration file before deploying the
router in a new application environment where new configuration is required.
Related Commands ■ save
■ display current-configuration
■ display saved-configuration