Command Reference Guide

286 ● reboot 3Com Router 5000 Family and Router 6000 Family
Command Reference
reboot
Purpose Use the reboot command to have the router reboot.
Syntax reboot
Parameters None
Example Reboot the device.
<3Com> reboot
This command will reboot the system. The current configuration has not
been saved and will be lost if you continue. Continue? [Y/N]
View This command can be used in the following views:
■ User view
Description Executing this command is equal to powering up the router after a power-down,
except that you do not have to go to the site where the router is located.
Executing this command may halt network operation transiently; use it with caution.
In addition, save the configuration file before rebooting the router, because the
configurations you just made cannot survive a reboot.