Command Reference Guide

3Com Router 5000 Family and Router 6000 Family probe-failtimes ● 273
Command Reference
probe-failtimes
Purpose Use the probe-failtimes command to configure the number of consecutive
probe failures allowed in an HWPing test before a trap is sent to the NMS.
Use the undo probe-failtimes command to restore the default.
Syntax probe-failtimes times
undo probe-failtimes
Parameters times
Number of consecutive probe failures. Valid values are
1 to 15
If no value is specified, the default is 1.
Example Send a trap to the NMS after three consecutive probe failures for an HWPing test.
[Router] probe-failtimes 3
View This command can be used in the following views:
■ HWPing Test Group view
Description A test may include multiple probes.