Command Reference Guide

3Com Router 5000 Family and Router 6000 Family adjust-ratio ● 3
Command Reference
adjust-ratio
Purpose Use the adjust-ratio command to set the ratio used by the RCR feature as a
criterion for judging whether the loads of the interfaces and the result of the
adjustment are consistent with the expected condition or ratio.
Use the undo adjust-ratio command to restore the default ratio, that is, 1.
Syntax adjust-ratio value
undo adjust-ratio
Parameters value
Percentage value. Valid values are 1 to 10. A value of
10, for example, indicates 10%.
Example Set the ratio to 9.
<3Com> system-view
[3Com] rcrlocal
[3Com-rcrlocal] adjust-ratio 9
Restore the default ratio 1.
<3Com> system-view
[3Com] rcrlocal
[3Com-rcrlocal] undo adjust-ratio
View This command can be used in the following views:
■ Rcrlocal view
Description It is not recommended to modify the ratio randomly for the sake of adjustment
precision.