Command Reference Guide

3Com Router 5000 Family and Router 6000 Family sdlc window ● 179
Command Reference
sdlc window
Purpose Use the sdlc window command to configure the length of the SDLC local
response window.
Use the undo sdlc window command to restore the default length of the SDLC
local response window.
Syntax sdlc window length
undo sdlc window
Parameters length
Length of the SDLC local response window. Valid
values are 1 to 7.
Default By default, the default length of the SDLC local response window is 7.
Example Configure the length of the SDLC local response window on the Serial1/0/0 as 5.
[3Com -Serial1/0/0] sdlc window 5
View This command can be used in the following views:
■ Synchronous Serial Interface view
Description The SDLC local response window refers to the maximum packets number that can be
sent continuously without waiting for the response from the peer end.