Command Reference Guide

178 ● sdlc timer ack 3Com Router 5000 Family and Router 6000 Family
Command Reference
sdlc timer ack
Purpose Use the sdlc timer ack command to configure the SDLC primary station
response waiting time (
mseconds).
Use the undo sdlc timer ack command to restore the default value of the
SDLC primary station response waiting time.
Syntax sdlc timer ack mseconds
undo sdlc timer ack
Parameters mseconds
The SDLC primary station response waiting time. Valid
values are 1 to 60000ms.
Default By default, the configured SDLC primary station response waiting time is 3000ms.
Example Configure the SDLC primary station response waiting time (mseconds) as 2000ms.
[3Com -Serial1/0/0] sdlc timer ack 2000
View This command can be used in the following views:
■ Synchronous Serial Interface view
Description The primary station response waiting time (mseconds) refers to the waiting time for
the response from the secondary station after the primary station sends information
frames.