Command Reference Guide

3Com Router 5000 Family and Router 6000 Family sdlc timer poll ● 177
Command Reference
sdlc timer poll
Purpose Use the sdlc timer poll command to configure the SDLC poll pause timer.
Use the undo sdlc timer poll command to restore the default value of the
SDLC poll pause timer.
Syntax sdlc timer poll mseconds
undo sdlc timer poll
Parameters mseconds
SDLC poll pause timer. Valid values are 1 to 10000ms.
Default By default, the SDLC poll pause timer is 1000ms.
Example Configure the SDLC poll pause timer as 200ms.
[3Com -Serial1/0/0] sdlc timer poll 200
View This command can be used in the following views:
■ Synchronous Serial Interface view
Description The SDLC poll pause timer refers to the waiting interval between the two SDLC nodes
polled by the SDLC primary station.