Command Reference Guide

176 ● sdlc timer lifetime 3Com Router 5000 Family and Router 6000 Family
Command Reference
sdlc timer lifetime
Purpose Use the sdlc timer lifetime command to configure the SDLC secondary
station response waiting time (
mseconds).
Use the undo sdlc timer lifetime command to restore the default value of
the SDLC secondary station response waiting time.
Syntax sdlc timer lifetime mseconds
undo sdlc timer lifetime
Parameters mseconds
The SDLC secondary station response waiting time.
Valid values are 1 to 60000ms.
Default By default, the SDLC secondary station response waiting time (mseconds) is 500ms.
Example Configure the SDLC secondary station response waiting time (mseconds) as 1000ms.
[3Com -Serial1/0/0] sdlc timer lifetime 1000
View This command can be used in the following views:
■ Synchronous Serial Interface view
Description The secondary station response waiting time (mseconds) refers to the waiting time
for the response from the primary station after the secondary station sends
information frames.