Command Reference Guide

174 ● sdlc simultaneous 3Com Router 5000 Family and Router 6000 Family
Command Reference
sdlc simultaneous
Purpose Use the sdlc simultaneous command to configure the SDLC data to use the
bidirectional transmission mode.
Use the undo sdlc simultaneous command to stop the SDLC data to use the
bidirectional transmission mode.
Syntax sdlc simultaneous
undo sdlc simultaneous
Parameters None
Default By default, the SDLC data are transmitted in bidirectional mode.
Example Configure the SDLC data to use the bidirectional transmission mode.
[3Com -Serial1/0/0] sdlc simultaneous
View This command can be used in the following views:
■ Synchronous Serial Interface view
Description This command configures the synchronous serial interface to work in bidirectional
data simultaneous transmission mode. That is, the SDLC primary station can send
data to the secondary station and receive data at the same time.