Command Reference Guide

3Com Router 5000 Family and Router 6000 Family sdlc modulo ● 171
Command Reference
sdlc modulo
Purpose Use the sdlc modulo command to configure the modulus of the SDLC.
Use the undo sdlc modulo command to restore the default modulus of the SDLC.
Syntax sdlc modulo n
undo sdlc modulo
Parameters n
SDLC modulus, with available value of 8 or 128.
Default By default, the SDLC modulus is 8.
Example Restore the default modulus of the SDLC.
[3Com -Serial1/0/0] undo sdlc modulo
View This command can be used in the following views:
■ Synchronous Serial Interface view
Description SDLC, like X25, adopts modulus mode to number information packets, and the
modulus of SDLC is 8 or 128. Generally modulus 8 is selected.