Command Reference Guide

170 ● sdlc max-transmission 3Com Router 5000 Family and Router 6000 Family
Command Reference
sdlc max-transmission
Purpose Use the sdlc max-transmission command to configure the SDLC timeout
retransmission times.
Use the undo sdlc max-transmission command to restore the default value
of the SDLC timeout retransmission times.
Syntax sdlc max-transmission retries
undo sdlc max-transmission
Parameters retries
The SDLC timeout retransmission times. Valid values
are 1 to 255 times.
If no SDLC timeout retransmission time is specified, the
default is 20.
Example Configure the SDLC timeout retransmission times as 30.
[3Com -Serial1/0/0] sdlc max-transmission 30
View This command can be used in the following views:
■ Synchronous Serial Interface view
Description The SDLC timeout retransmission times (N2) refers to the retransmission times before
receiving the acknowledgement packet from the peer end.